BCM® BFH 16" Mid Length (Light Weight) Upper Receiver Group w/ MCMR-13 Handguard

MSRP: $967.95
Your Price: $769.95
(You save $198.00 )
(7 reviews) Write a Review
SKU:
BCM-URG-MID-16LW-BFH-MCMR-13
Caliber:
5.56 NATO
Barrel Length:
16in
Barrel Style:
BFH
Handguard:
MCMR-13
Barrel Profile:
Light-Weight
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 
 
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

7 Reviews

  • 5
    BCM® BFH 16" Mid Length (Light Weight) Upper Receiver Group w/ MCMR-13 Handguard

    Posted by Logan on Mar 29th 2021

    I held off on giving a review on this until i got some range time with it. I like the handguard because it is smaller. I have light switch on top of the pic rail and I am still able to see through my co-witness EXPS3/G33 setup. It does heat up quickly but most light weight handguards do. Runs perfect, no issues. I haven't cleaned it yet and don't plan on it until i get a failure. I am a huge fan because it is high quality and worth the money. Worth the wait

  • 5
    quality look feel and fire

    Posted by Matt on Mar 25th 2021

    glad i got a BCM

  • 5
    The upper that I receiver that I ordered arrived quickly. It was top quality. Finish was great as well as function.

    Posted by Gary Rasmussen on Mar 14th 2021

    I am pleased with the quality of the product. The fit to the lower was top quality as well. I am completely satisfied with this item, It is the second BCM product that I own, and would recommend BCM products to anyone.

  • 5
    16 inch BCM recce complete upper

    Posted by Timothy Hoffman on Mar 10th 2021

    I searched forever to get a complete rifle, finally got lucky enough to find a complete upper on the website, everybody on gun broker has lost their minds, purchase a complete upper from the factory, found a complete brand new lower online, I’m happier than a pig in shit, Took it out to the range last weekend, through my sigsauer bravo five on, did a 36 yard 0, this thing runs like a Swiss watch, so very happy to have it, I really wish you could stop all your rifles from ending up on gun broker instead of in the hands of people that really want them to shoot, I know you’re selling them and what people do with them after that it’s up to them, but it really sucks as it seems the only place you can get one unless you get lucky his gun broker for $2400 or more, but I should stop bitching because I got mine and so far I love it.There was definitely some envious people at the range that day, they will definitely crap themselves when I show up next week with my BCM and a Daniel defense in the case :-) :-), wish you all the best.

  • 5
    Top of the line

    Posted by Jon on Mar 1st 2021

    First BCM upper receiver I’ve ever bought and I see why the brand is popular. Light weight and hasn’t failed me yet.

  • 5
    Excellent

    Posted by Travis Cox on Feb 14th 2021

    I have 56 rounds. An incredible test of reliability, I know! Seriously, the fit and finish are excellent. I've no doubt that it will serve me well for years to come.

  • 5
    Love this upper

    Posted by Robert Hester on Feb 7th 2021

    I'm so glad I went with BCM and got a BHF it's so accurate I couldn't believe it was me behind the trigger coming from an ak-47 to this was game changing!