BCM® MK2 BFH 16" Mid Length Upper Receiver Group w/ MCMR-15 Handguard

MSRP: $900.90
Your Price: $720.90
(You save $180.00 )
(16 reviews) Write a Review
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
Bravo Company builds:  Life Saving Tools™
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
Featuring BCM’s Patent Pending MK2 Upper Receiver
This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.   A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

16 Reviews

  • 5

    Posted by Daniel on Sep 25th 2020

    Fantastic rifle. I bought a complete BCM lower from Brownells and put this upper on it. Could not be more pleased. Tight clearances. Close groupings. Rifle shoots better than I do. Immensely impressed with Bravo Company. I now see why they have the reputation they do.

  • 5
    BCM Upper

    Posted by joshua on Sep 20th 2020

    OMG this upper is so freakin awesome ! The quality and craftsmanship is above all else. Thank you BCM for helping me complete my first build. Money well spent couldn't be happier with the purchase of this upper.

  • 5
    Better than what I was expecting

    Posted by Gary Mercante on Sep 17th 2020

    This was my first purchase of a complete upper. I was researching all other makes but my decision came BCM. So I ordered 2 of these and couldn't be happier with my decision. After opening the box the first thing I noticed was the build and quality. Everything was nicely made and assembled and the total package exceeded my expectations. For the money you cant go wrong if you're looking for quality.

  • 5
    Recce 16” BHF Complete Upper with Mlock

    Posted by Ed S on Aug 21st 2020

    Haven used the upper yet but I can tell you this was packaged well and when I opened the box and unwrapped the bubble wrap there was a beautiful looking BCM Recce 16” complete upper. And its true about the wonderful smell...lol . I can see the quality in this product. Can’t wait to shoot with this upper! Can not wait to get my next BCM item, hopefully soon!

  • 5
    Above & beyond

    Posted by Michael on Aug 21st 2020

    Not only is this the lightest upper i'v owned but the most durable. The Samurai sword of firearms if you will.

  • 5

    Posted by Anonymous on Aug 20th 2020

    Christmas came in August!

  • 5
    Upper receiver

    Posted by CHRIS on Aug 18th 2020

    BCM is a outstanding company and this upper has been flawless as expected.

  • 5
    Meticulous perfection

    Posted by David on Aug 16th 2020

    This upper is exactly what I was expecting. No doubt in my mind this is lifesaving equipment.

  • 5
    I love BCM

    Posted by Matt on Aug 8th 2020

    Received my upper in a little less than 2 days from ordering...from basically half the country away..haven’t even taken it out to test yet but I’m already in love with this upper