BCM® BFH 16" Mid Length Upper Receiver Group w/ KMR-A15 Handguard

MSRP: $978.95
Your Price: $780.95
(You save $198.00 )
(114 reviews) Write a Review
SKU:
BCM-URG-MID-16-BFH-KMR-A-15
Caliber:
5.56 NATO
Barrel Length:
16in
Barrel Style:
BFH
Handguard:
KMR-A15
Stock Status:

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

 
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
 
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

114 Reviews

  • 5
    Good Product for a Good Price

    Posted by Justin Benfield on Feb 3rd 2021

    Good Product for a Good Price

  • 5
    Very pleased

    Posted by Derek Gill on Jan 20th 2021

    It’s no secret that BCM uppers are in a league of their own. I’m very pleased with the build quality and the weight of this upper. This thing functions beautifully on my LWRC lower and drives tacks at 300 yards. This was for my RECCE build and I have not been disappointed. I highly recommend picking one of these things up before they become an NFA item.

  • 5
    Well worth the $$

    Posted by Scott on Jan 19th 2021

    Great complete upper, everything it is advertised to be

  • 5
    Awesome stuff

    Posted by Shaayne on Jan 18th 2021

    First bcm I’ve had Definitely the quality i was expecting and what everyone says online. Everything fits nice and tight. No slop in anything. Lighter than what im used to and seems tough as nails. Mounting the sight on the picitiny rail was a nice tight fit no major slop like on cheaper rails Haven’t shot it yet but i I don’t expect any less quality

  • 5
    16" BCM 5.56 Complete Upper Assembly

    Posted by Josh B on Jan 18th 2021

    All right, right, and very well made. Even lighter than I expected! BCM deserves their reputation in the top 5 or so manufacturers. Well packed and oiled to ship. I would come back to BCM for any AR needs.

  • 5
    BFH mid length upper receiver

    Posted by Tom on Jan 10th 2021

    Great upper receiver fit and finish are excellent. Right out of the box I was able to get 2” 5 shot groups with a red dot at 100yds. So far 250 rds through the rifle with no issues.

  • 5
    16” Mid length KMR BFH upper

    Posted by Nathan Stephens on Dec 27th 2020

    Love it, super accurate, machining perfect, excellent QC, I’ll def be buying more from BCM, my new favorite! Thanks

  • 5
    Great product

    Posted by Keith Hofmann on Aug 22nd 2020

    This was the first completed upper I purchased anywhere and like everything that bcm makes it’s phenomenal. Solid groupings, I feel almost no recoil because of the mod 0 comp and my groupings are awesome out to 100 yards. Haven’t tried further yet, but I imagine those will be awesome as all...unless I’m terrible that day, but that’s on me not the firearm haha. Bcm is awesome as is this product.

  • 5
    Great shooter

    Posted by Mitchell Cain on May 5th 2020

    Shoots IMI 62gr green tips into 1/2 @ 100 yards what more can you ask . Awesome products