BCM® BFH 16" Mid Length Complete Upper Receiver Group w/ KMR-A13 Handguard

MSRP: $1,042.95
Your Price: $819.95
(You save $223.00 )
SKU:
BCM-URG-MID-16-BFH-KMR-A-13
Caliber:
5.56 NATO
Barrel Length:
16in
Barrel Style:
BFH
Handguard:
KMR-A13
Stock Status:

About the BCM® BFH 16" Mid Length Complete Upper Receiver w/ KMR-A13 Handguard

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount

Manufactured by Bravo Company MFG, Inc. (BCM)

These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

Cold Hammer Forged Barrels

This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)

M4 Feed Ramp Barrel Extension and Upper Receiver

In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps.
 
This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.

T-Marked Upper Receiver

The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

USGI 1/7 Twist Rate

The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)

BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.

Chrome Bore and Chamber

One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

Manganese Phosphate Barrel Finish

Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.

5.56 NATO Chambers

The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

Government Barrel Profiles

Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.

HPT / MP Inspected Barrels

Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.

Shop Related Products:

Want to see more upper receivers? Click the links below to view more BCM® AR complete uppers!

 

Bravo Company builds: Life Saving Tools™
 
Copyright 2023 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

84 Reviews

  • 5
    Shipping/business management

    Shipping was so fast. Bravo Company always hooks you up with some extra merch! Product is in excellent condition. Absolutely satisfied, outstanding service!

  • 5
    BCM upper 223

    I have owned BCM products for some tome and although I have not shot this upper yet, I have no doubt that it will perfect.

  • 5
    Upper

    This is a beautifully made upper. Fit and finish is excellent.

  • 5
    Another Upper!

    Once again a rock solid upper to finish off the BCM complete lower, outstanding finish fit and function!

  • 5
    It's a BCM

    I have several AR platform rifles from great Mfg's but none are better than Bravo Company. Service was awesome as always. Took my new Recce16 to the range this weekend and shot MOA to Sub MOA with 77gr IMI at 100yds with a 1-8 optic. Can't ask for much more than that.

    I also purchased one of the 18" bbl models and that thing is stupid accurate with the same 77gr IMI ammo. I'm averaging 1/2 MOA at 100 yds.

  • 5
    More parts!

    The 16" I just purchased is the perfect match to the 18" upper I bought from BCM two years ago for playing around with 3 gun comp. Accuracy is outstanding and with a Law Tact. folding stock adapter the carbine fits nicely in a sneaky bag for discreet transport.
    Another Great Product!

  • 5
    The best products bcm bfh mid length upper receive

    Bcm has the best products at decent prices but hands down I would bet my life on any bcm guns or part's. I trust no other companies like I trust bcm. The bfh mid length upper is the best, cold hammer forge is one of the most accurate rifle that I own and I own quite a lot. You can get any upper from any Joe shmo but you can always count on bcm to be the most accurate rifle and best put together gun you can get that won't break the bank.

  • 5
    Great to deal with!

    Purchased a BCM upper assembly recently with a couple of accessories. Fast delivery and high quality products.

  • 5
    BCM BFH 16" Mid Length Upper Receiver Group

    Totally amazed, nice job BCM! Good price, fast delivery, showed my final build to my friends who are currently doing builds, and they are very impressed. Disclaimer: I work in the Quality department of a major Machine shop, that does DOD contracts, Sandia labs and more! Cheers!