BCM® BFH 16" Mid Length (ENHANCED Light Weight) Upper Receiver Group w/ KMR-A15 Handguard

MSRP: $889.95
Your Price: $709.95
(You save $180.00 )
(160 reviews) Write a Review
SKU:
BCM-URG-MID-16-BFH-ELW-KMR-A15
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

160 Reviews

  • 5
    Awesome product, very pleased

    Posted by Ryan Washabaugh on May 22nd 2020

    Would not change anything, very pleased

  • 5
    Amazing

    Posted by Brady O'Dell on Apr 25th 2020

    Super fast shipping even during covid 19.

  • 5
    Very fast shipping

    Posted by Brady O'Dell on Apr 19th 2020

    Items were shipped out super fast even with covid19 going on.

  • 5
    Quality, lightweight and valued customer

    Posted by Rock on Sep 3rd 2019

    Shipping- was fast and simple, less than a week for sure.
    Quality- I will say that I do not have much to compare to outside standard m4 and m16 service rifle with my experience in the marines.. that being said I am your typical crayon eating rigger puller.. from my service experience, I'd say this upper is of same durability as far as performance over time THUS FAR. Simply have not had it long enough nor the money and time to put enough rounds through it to consider long term. And holy crap the weight difference is way way noticeable and the slim, sleek feel as soon as you grab it out of the box, very impressed.
    The "standard" I'm assuming as far as what else came in the box was very nice; reading magazines, hat, posters, and stickers ahah seems simple but it still very nice and makes you feel a little less like "just another number/customer"
    Ending thoughts- overall GREAT experience, will use this company again, already have and will continue to reccomend to friends.

  • 5
    Extraordinary product and customer service

    Posted by James J. on Jul 22nd 2019

    Bravo Company was extraordinarily responsive to my questions and went way above and beyond my expectations with this transaction. This high quality product is exactly what I wanted. Thank you, BCM!

  • 5
    BUY THIS UPPER NOW

    Posted by My Permit is the 2nd on Jul 17th 2019

    First time BCM buyer, and my first build. Hands down without a doubt the absolute best purchase I have ever made. From customer service to the super fast shipping and quality of the upper, I could not be more satisfied. Suck it, Dems and Libs.

  • 4
    Customer review

    Posted by anonymous on Jun 4th 2019

    Bravo has the fastest shipping in the market. I bought many different parts from other companies and Bravo Company has them beat with quality and speed. I live in Hawaii and speed is in hard of over here mahalo bravo company you got my business.

  • 5
    Great products

    Posted by J F on Jun 4th 2019

    This was not my first purchase from BCM. Every time I am more than satisfied, never disappointed. Cannot wait to get more stuff.

  • 5
    Good Stuff

    Posted by Woody on Jun 4th 2019

    Best upper I own! Shoots great and super light weight. The KMR alpha rail is minimalistic and light. My father wanted to trade out all of his handguards after shooting my BCM 16". Great customer service an fast shipping.