Geissele AR15 Super Semi-Automatic Trigger - Small Pin

$240.00
(11 reviews) Write a Review
SKU:
GEISSELE-SSA
Stock Status:
Geissele Super Semi-Automatic Trigger for your small pin (milspec) lower receiver AR15.

Super Semi-Automatic Trigger Overview

The Geissele Super Semi-Automatic (SSA) Trigger is the semi-auto only version of a select fire trigger that Geissele makes for U.S. SOCOM. The SSA is a non-adjustable combat trigger, it is not a match trigger. The second stage break is like a carrot rather than an icicle. Suitable for Close Quarters Battle (CQB) and mid-range carbine work, the Geissele SSA is also the perfect trigger for Squad Designated Marksman (SDM) rifles. A short summary of the Geissele SSA features and advantages follows.

 
1. Performance Advantages for the Shooter
 
The Geissele SSA has a pull weight of about 4.5lb. 2.5 lbs on the first stage and 2lb on the second stage. The pull weights and sear engagement are non-adjustable.
Trigger and hammer are made from quality tool steel
Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
The Geissele SSA trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
A full force hammer spring is used for quick lock time and positive ignition of all types of ammo. No lightened hammer spring is used.
The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases lock time and increases accuracy of the weapon, especially for snap shots.
 
2. Advantages for the Armorer
 
The Geissele SSA is a simple design that is very similar to the original M16 trigger. The number of parts is identical.
There are no adjustment screws to come loose.
All springs are captive; they will not get lost during dis-assembly in the field
The entire trigger can be dissembled for cleaning (no rivets or staked parts)
The trigger can be installed without removing the safety
Sear engagement is pre-set from the factory.
Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed with rudimentary tools.
Triggers come with a slave pin for the trigger/disconnector assembly for easy installation.
 
3. Safety Advantages
 
The Geissele SSA is a 2 stage trigger where there is generous overlap of the sear surfaces which contributes to safety and a low tendency of any inadvertent movement of the trigger to discharge the weapon.
The Geissele SSA has a patented pseudo sear that is almost identical to the standard AR15 single stage sear. However, this secondary sear has surfaces that never touch during normal operation. This sear prevents the hammer from falling unless the trigger is pulled.
The secondary safety sear contributes to shooter confidence in dynamic/vehicle situations where a fellow shooter's muzzle may cover him. There is firm knowledge that even with the safety in the fire position the weapon can never discharge unless the trigger is pulled.
Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces. The trigger is designed to operate in dusty, abrasive environments that cause wear.

 

***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

11 Reviews

  • 5
    Geissele SSA trigger

    Posted by anonymous on Feb 18th 2010

    Awesome trigger. used it in my 1st AR build. smoooooooth. and fairly easy to install, especially with the guide pin it comes with. definitely gonna get another one for my next few builds

  • 5
    SSA

    Posted by Jeremy Miller on Oct 8th 2009

    These triggers are definately combat worthy. It has a smooth takeup ~5 lbs and breaks like a glass rod on the so called second stage. It has to be the smoothest, most crisp and reliable trigger I own. I will be ordering more to replace my triggers in all of my AR's.