SLip2000™ Carbon Killer Is Here!
SLip2000™ Carbon Killer is finally here. Along with the new name comes new packaging. All glass and metal have been replaced with durable plastic. These user-friendly packages can also be used as storage containers.
The time consuming and labor intensive chore of cleaning your pistols, automatic and semi-automatic weapons is a thing of the past with Carbon Killer.
SLip2000™'s Carbon Killer was designed with your health and safety in mind. Unlike other products, this product is non-flammable, non-hazardous and it is biodegradable. Carbon Killer provides you with a safe effective way to clean carbon, lead and plastic wad fouling.
SLip2000™'s Carbon Killer does not stop working and can be used again and again. If stored properly one jar will provide a user several cleanings and will last for several months.
Can be used on
All revolvers, pistols, automatic and semi-automatic weapons including: M-16, AR-15, MP-5, and all Machineguns like the AK-47 and 249-SAW.
Flash suppressers, silencers and cans
Dissolves burnt on carbon and will help flush powder and carbon residue out of all cans and suppressors.
Dissolves burnt on carbon and will help flush powder and carbon residue off of your compensator.
Simple to use
Hang dirty parts with hangers provided in jar. Allow parts to soak in solution 2 to 15 minutes. Remove parts from solution and wipe or rinse off carbon fouling. It's that easy. Depending on the frequency of cleaning or type of ammo used a second soaking may be required.
For larger parts that will not fit into jar, soak a nylon brush or rag in Carbon Killer, apply to area that needs to be cleaned and allow product to set for 2 to 5 minutes. When ready to clean, saturate brush or rag with Carbon Killer again and wipe or brush away carbon. Parts may also be rinsed clean under hot water.
After cleaning, always re-apply SLip2000™ Lubricant to metal surfaces and allow to penetrate pores of metal. SLip2000™ will form a barrier and help keep carbon, lead and plastic from sticking. Your next cleaning will take half the time.
Shotguns - Pistols - Revolvers - Black powder guns - Automatic weapons - Silencers - Flash Suppressers - Compensators
May be used in chambers and barrels as a bore cleaner. Apply to cylinder faces, bolt faces and any other hard to clean areas and allow to soak for 2 to 10 minutes. Carbon, lead, copper, plastic and burnt powder will wipe clean with a nylon brush. Next cleaning will be much easier with SLip2000™ Lubricant/Cleaner. Users will actually be able to wipe carbon and plastic wad fouling away.
For best results, on parts that are not cleaned on regular bases, completely submerse parts to be cleaned and allow to soak for 5 to 15 minutes. Remove parts and wipe, brush or rinse clean.
Carbon Killer is for cleaning bores and internal metal gun parts by soaking them. It is an aggressive cleaner and should not be used to clean the outside of your gun. It can damage and even remove some finishes.