BCMGUNFIGHTER™ Vertical Grip Mod 3-Picatinny - Black

MSRP: $22.00
Your Price: $19.95
(You save $2.05 )
(182 reviews) Write a Review
Stock Status:



The new (United States Patent 9,709,358) BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.

Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.


Direct Attach Picatinny 1913 Rail Version

  • Low-profile length for increased mobility and decreased "snag" factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. United States Patent 9,709,358
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.


Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM 1913 Vertical Grip
  • Push tool into the screw to extend the Picatinny anchor, making it protrude from the top.
  • With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.
  • Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners

United States Patent 9,709,358



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

182 Reviews

  • 5

    Posted by jstyer on Jul 1st 2021

    Engeinuous attachment mechanism that uses the sides of the grip itself to lock fore & aft into the picatinny slots. Big brain designer came up with this one.

    Some could gripe about the need to remove compenents from in front of/behind the grip when you initially slide it on... But only a problem for scrubs who constantly add/remove stuf from their rails.

  • 5
    Vert grip

    Posted by Quality foregrip on Jun 29th 2021

    What can I say, it's a vert grip. pretty great quality and seem super durable. what else can you expect from BCM. I have yet to have a single problem with their products.

  • 5
    Great grip!

    Posted by Charlie Martin on Jun 27th 2021

    I haven’t used any type of forward grips in years and decided to give this a try. Positions my hand to make it more comfortable shooting and I feel like I have more control on the rifle.

  • 4
    Great Grip

    Posted by Kishan on Mar 4th 2021

    This was exactly the item I was looking for and at a decent price point. Delivery was in a reasonable time frame as well.

  • 5
    Marine-proof fantastic

    Posted by 0311 on Feb 18th 2021

    Needed a foregrip for my M27 IAR, and what can I say... One of the best foregrips for both ergonomics, comfort, and durability. It still hangs strong underneath my abused rifle after many field ops and harsh conditions. The only nitpick problem I have is that the fact you have to slide it onto the picatinny rail instead of being able to directly attach it to the rail, which forces me to remove my bipod every time I attach/remove the grip. Nevertheless, if it's good for a crayon-eater, it's probably good for you. Outstanding product.

  • 5

    Posted by Jeff Byrd on Feb 16th 2021

    Awesome grip, easy to install. fast shipping.

  • 5
    BCM grip

    Posted by Jeremy Lamano on Feb 12th 2021

    Excellent grip. Great fit. Easy installation. Made in the USA.

  • 5
    Vertical grip

    Posted by JReyes on Feb 12th 2021

    I've been a fan of vertical grips for about 20 years and I really like the small size of this one. I don't know why companies are still making full size/long grips.
    I use this as a place for a few fingers to chill while I'm gripping up front. Feels natural and very solid.

  • 5
    Vertical Grip

    Posted by JEd on Feb 4th 2021

    Just enough to to pull the weapon in tight and the angle keeps the thumb and radius in line. Feels solid and has not required re-torquing.