BCM® Vertical Grip Mod 3-Picatinny - Flat Dark Earth

MSRP: $22.00
Your Price: $19.95
(You save $2.05 )
Maximum Purchase:
100 units
Stock Status:


BCM®™ VG-1913-Mod-3


The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.

Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.


Direct Attach Picatinny 1913 Rail Version

  • Low-profile length for increased mobility and decreased snag factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.


Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx driver) into the screw from under the BCM 1913 Vertical Grip
  • Push tool into the screw to extend the Picatinny anchor, making it protrude from the top.
  • With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.
  • Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners

***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

54 Reviews

  • 5

    This grip is short and you don't hold it like a traditional vertical grip. It's a halfway point between a vertical grip and an angled forward grip.

    10/10 would buy again.

  • 5

    Typical awesome product you can expect from BCM! One of the great companies I love purchasing from. I will be a customer for years to come…

  • 5
    Great foregrip

    This grip is awesome. Light, indestructible and reasonably priced. Got one for my work gun and one for my home gun. Love em.

  • 4

    I like this grip i just wish it was capped at the bottom like the other Mod's. The FDE seems a little light compared to most. Overall awesome grip for the money.

  • 5

    Stability increased significantly, grip is a firm and solid one.

  • 5
    My favorite

    Between this and the Tango Stubby. This usually wins because it works just as well, looks just as good and is much cheaper.

  • 5
    Vertical Grip

    Real nice grip just the right size.

  • 5
    Fore grip

    This being the only shorty fore grip that's not a 90°vert grip it's awesome. It dose exactly what i need it to do abs is very sturdy abs locks in well to the quad rail. Overall I'd recommended it to all my buddies.

  • 5
    Vertical Grip FDE

    Happy with the grip. Comfortable. However, it says that there is a wrench included with it for install, but there was not with mine. Not a big deal since I have many but just thought I’d share.