BCM® Vertical Grip Mod 3-Picatinny - Black

MSRP: $22.00
Your Price: $19.95
(You save $2.05 )
Stock Status:


BCM®™ VG-1913-Mod-3


The new (United States Patent 9,709,358) BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.

Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.


Direct Attach Picatinny 1913 Rail Version

  • Low-profile length for increased mobility and decreased "snag" factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. United States Patent 9,709,358
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.


Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM 1913 Vertical Grip
  • Push tool into the screw to extend the Picatinny anchor, making it protrude from the top.
  • With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.
  • Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners

United States Patent 9,709,358



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

242 Reviews

  • 5

    Perfect on my Ak build! Slapping them on all my rifles hell I’m slapping it on my pistols I’ll put a rail on my broom and slap in on thanks guys!

  • 4
    Bravo foregrip

    Nice quality comfortable grip sturdy attachment design

  • 5
    BCM Gunfighter Vertical Grip Mod 3

    For me, the BCM Gunfighter Vertical Grip Mod 3 is the best grip. For a better hold/stop, recommend installing this grip with the flat side facing you.

  • 5
    It works and legal

    Everything about bcm is too self I would have loved to carry there m4 when I was in usmc instead off the wore out 16 we were issued I bought a colt first it was not very good quality that I expected my bcm is everything I expected wouldn’t buy anything else good job marines

  • 2

    I used a t15 driver on the screw and it became stripped with little effort.

  • 1
    Foregrip for SIGM400 Tread

    Was the wrong mount for my firearm. Website said it was the right fit.

  • 5

    Engeinuous attachment mechanism that uses the sides of the grip itself to lock fore & aft into the picatinny slots. Big brain designer came up with this one.

    Some could gripe about the need to remove compenents from in front of/behind the grip when you initially slide it on... But only a problem for scrubs who constantly add/remove stuf from their rails.

  • 5
    Vert grip

    What can I say, it's a vert grip. pretty great quality and seem super durable. what else can you expect from BCM. I have yet to have a single problem with their products.

  • 5
    Great grip!

    I haven’t used any type of forward grips in years and decided to give this a try. Positions my hand to make it more comfortable shooting and I feel like I have more control on the rifle.