BCM® Vertical Grip Mod 3-Picatinny - Black

MSRP: $22.00
Your Price: $19.95
(You save $2.05 )
(242 reviews)
SKU:
BCM-VG-1913-MOD-3-BLK
BCM® Vertical Grip Mod 3-Picatinny - Black
Stock Status:

 

BCM®™ VG-1913-Mod-3

 

The new (United States Patent 9,709,358) BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.

Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

 

Direct Attach Picatinny 1913 Rail Version

  • Low-profile length for increased mobility and decreased "snag" factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. United States Patent 9,709,358
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

 

Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM 1913 Vertical Grip
  • Push tool into the screw to extend the Picatinny anchor, making it protrude from the top.
  • With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.
  • Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners



United States Patent 9,709,358

 

 

***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

242 Reviews

  • 5
    BCM Vert Grip - can't go wrong!

    This is by far my favorite vertical grip and I'm running one on all of my AR patterned rifles. It's simple, robust, and the slight angle makes it extremely comfortable for the type of grip I prefer.

  • 4
    Good grip, needs improved mounting.

    This grip was purchased in order for my unit to compare it to other, similar products. Feedback was positive regarding the quality of manufacture and the ergonomics, but negative regarding the mounting. All felt that using a phillips head or straight edge screwdrive for attatching to a standard rail would be far more convenient., as carrying a torx in the field would be unlikely.

  • 4
    Just what I was looking for

    Right size shape and feel. Fast shipping. 4 stars because the bracket fit so tight I had to drive it on with a rubber mallet and punch.

  • 5
    Love BCM!

    This was my first experience ordering from Bravo Company. Website was easy to navigate, placing order was simple, product shipped extremely fast, and the product is great! This is a great company and I had a great experience doing business with BCM. I will now be a life long customer! Great job Bravo staff!

  • 5
    Stubby grip

    Works great as a handstop.

  • 4
    Love it

    I Love it. The slight cant helps keep my AR stable while firing rapid burst. A lot better than my old knights armorment grip.

  • 5
    ANOTHER GREAT PRODUCT FROM BRAVO COMPANY

    I ordered the grip April 7 and 3 days later I was installing it on my upper receiver! The grip is comfortable and ergonomic; which is important for me because I have limited movement on my left wrist due to hardware. Installation is easy and sits perfectly on my Picatinny Rail. I run a piston AR and thankfully the grip does not add any weight. I have confidence that the grip will take all the abuse I may throw at it!

  • 5
    Best stubby vertical grip I've used

    Purchased the stubby keymod twist lock design a few years ago and really liked it. Recently got a keltec ksg and after cleaning up a few action parts I've grown to enjoy it. Works perfectly but was having a difficult time with finding consistent hand placement on the forend. I tried various handstops and grips then I stumbled onto a picture of the bcm picatinny mod 3. Absolutely perfect. I use it as a hand stop with my thumb forward on the forend and the mod 3 canted rearward. I no longer have to worry about hand placement or being pinched against the lower receiver. I use a strip of skateboard tape along the forend for more positive thumb traction.
    With the mod 3 and some light action work the ksg is a keeper. No worries of the plastic pic rail braking and shooting my hand off ( we've all seen the pictures) as I don't actually apply forward pressure on the vertical grip. Bcm comes through again. Love this thing. Thanks guys!

  • 5
    Vertical Grip Mod 3

    40 Rounds, Charlie Mic