BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(184 reviews)
SKU:
BCM-PNT-TA1
BCM® PNT Trigger Assembly AR15
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    BCM PNT Trigger assembly AR 15

    Excellent parts and service thanks Bravo co
    keep up the good work.

  • 5
    Trigger

    Wow, smooth and bad ass!!

  • 5
    Affordable Upgrade

    If you want a trigger upgrade without spending a ton of dough, this trigger assembly is the way to go.

    I bought one for my AR-15 . I liked it so much I bought another for my AR-10.

    Nice crisp break and seemed like take up was required.

  • 5
    Far more than what you pay for

    The trigger performs far better than other triggers I've tried that cost more. Exactly what you need and nothing you don't. Mine pulls at about 5.5 pounds on average and has a smooth and clean break that doesn't hamper accuracy at practical ranges. It's by no means a match trigger but that's not what it's sold as. Another excellent product from BCM.

  • 5
    PNT Trigger Assembly BCm-PNT-TA1

    GREAT !! for me. Thanks to Sootch00 I purchased. My horrible trigger pulled at 12lbs, this brought it down to 6.75lbs. Real happy. smooth,no grit, not a lot of take up like my orig. Installed easy thanks to Sootchs vid. Can wait to take to the range. I can't say it a cure all, but for the price, it works well for my budget.
    Happy shooter here.

  • 5
    For the average Joe that loves to kill paper...

    Stuff just came in this morning and did some side by sides on the G word, factory BM and DPMS package, and this is all I need. No grit and a smooth pull. For someone that is not on the upper end of competition and wants something moving toward the pricey upgrades... this is the ticket.

    I have found my new home for parts and accessories. I don't think they ever sleep, because they answer my stupid questions immediately... customer service I have never experienced before.

  • 4
    BCM PNT Trigger

    This trigger is a substantial upgrade over a plain-Jane GI trigger. When shot side-by-side to a standard trigger, overall pull was noticeably less and the break was crisper.

  • 5
    BCM PNT AR15 fire assembly group

    I pulled the trigger group from my SIg M400 as I didn't like the hard griddy feel of the trigger pull . I replaced the Sig trigger group with your BCM PNT group . What a difference . The pull has smoothed out a considerably bit and feels so much better than the Sig assembly . It just makes sense to spend $60 dollars on the "PNT " system rather than two to two hundred fifty dollars on other trigger groups with a 3 to 3.5 pd pull not intended for a AR15 Carbine used for personal and home defense ......

  • 4
    Milspec

    Perfect fit. Definitely not a precision lightweight trigger. Feels good, but heavy.