BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(184 reviews)
SKU:
BCM-PNT-TA1
BCM® PNT Trigger Assembly AR15
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    Standard VS These

    Definite improvement over standard triggers. Smoother and feels like less pull weight than gauge indicates. Buying parts kits without the trigger & hammer and adding these in, is the way to go. Not that much difference in over all price, in the end.

  • 5
    Love it

    Smooth as silk, tough as nails.

  • 5
    AR-15 trigger assembled.

    Well pleased; very good quality

  • 5
    recent purchase

    Happy with results. Fast shipping.

  • 5
    Trigger

    Fast shipment great product will be ordering more

  • 4
    Another great option

    Just installed this, it feels great. Almost no creep and what's there is butter smooth. Shooters wanting a "match" trigger will think it's heavy but it's perfect for a battle rifle. Very nice trigger for the money. A bit more expensive then a couple other options and that's the only reason I gave it four stars. Quality is a 5 for sure. Longevity will remain to be seen but I expect it will be boringly reliable.

  • 5
    Great trigger

    The PNT trigger was used to replace a stock G.I. trigger. The trigger went in with no problems and gave a nice crisp,4.5-5 pound trigger pull. This trigger feels crisper than the ALG triggers I used in the past.

  • 5
    Bcm pnt trigger is the bomb

    I was amazed at how crisp and smooth this trigger is . Especially at its price. Must ne BCM's best kept secret.

  • 5
    trigger upgrade

    Just installed this sweet trigger in a .300 BO pistol build. Smooth! no grit, no creep, nice break, smooth reset. This trigger is miles better than a standard Mil-Spec and on par if not better than an ALG trigger and it cost less. BCM quality, amazing finish...Well worth $60!