BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
SKU:
BCM-PNT-TA1
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    PNT Trigger Assembly

    Nice smooth and crisp breaking trigger. I Have not had any rounds fired with the new hardware installed but am l looking forward to doing so in the near future and will be happy to update this review.

  • 5
    excellent

    Love it

  • 5
    Bravo Company the best

    Some of the best stuff on the market

  • 5
    Great trigger

    Have 3 of these and planning on getting more. Good product at a good price.

  • 5
    BCM Trigger Assembly AR15

    Very nice Mil Spec trigger assembly. BCM quality

  • 5
    Alawys a sure thing

    Perfect every time! Once I click on the order button I never give my order a second thought until, very shortly thereafter, it arrives at my door.
    Top shelf components at a fair price.
    Order with the utmost confidence.
    CW5 JP, US Army, Retired

  • 5
    Completely satisfied!

    There is nothing that I would change with my experience with Bravo Conpany. Everything went smoothly.

  • 5
    smooth

    The finish of the metal itself is very smooth this trigger is amazing for the price.

  • 5
    BCM PNT

    Purchased a BCM complete lower from Rainier Arms. Based on the part number on their site and a check of the part number on BCM site, I was under the impression that it would come with the PNT. I was wrong. So, I ordered one from BCM and I really like it. Very smooth, slick, and high quality. It seems it is the same as the ALG ACT set. BCM has a star stamped on the trigger.
    I like the PNT and it roughly $4.00 less than the ALG ACT.