BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(184 reviews)
SKU:
BCM-PNT-TA1
BCM® PNT Trigger Assembly AR15
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    Bcm pnt trigger assembly

    Nice upgrade for a stock trigger and priced right

  • 4
    Great job

    Feels smooth and im verry excited to finish this build and put some rounds through this.

  • 5
    What a difference.

    Switched out my S&W AR15 Sport trigger to this. What a difference! I don't think you could find a better trigger even close to this price. As always quality gear from BCM.

  • 5
    Great trigger

    I have 3 of the PNT triggers and this is the best trigger without spending $200+. Very crisp and clean.

  • 5
    BCM PNT Trigger Assembly AR15

    EXCELLENT quality product. Works exactly as advertised, smooth clean crisp break. I put these in my finished 80% lowers and couldn't be happier. I would HIGHLY recommend these to anyone. Great company to do business with. Customer service is top shelf.

  • 5
    PNT Trigger

    Probably one of the best triggers I've dropped in. It is a very smooth but firm feel with a nice reset. I have shot triggers three times the price that are not as nice...

  • 5
    Quality trigger

    This trigger has an excellent feel, is easy to install, comes with all the necessary material (minus the punch and hammer you will need), and appears to be exactly as advertised. However, I have some small complaints which focus on the lack of information on the website rather than on the trigger itself. As you will notice, there is no information on the site about the specifications.

    The trigger is a single-stage design (or if it is intended to be two-stage there is no take-up that I can perceive).

    The pull weight feels somewhere between 4 and 5 lb (I do not have a functioning trigger gauge, but compared to my Geissele SSA-E, the PNT seems about as light of a pull).

    The overtravel is minimum at about 0.10" and the reset point is the same distance. Trigger reset is crisp, tactile, and audible.

    Overall I recommend this trigger to anyone looking for a quality product at an introductory price. Seriously, the cost-benefit tradeoff of this trigger is second to none.

  • 5
    Excellent Trigger

    PNT Trigger came with my lower, trigger is super smooth and crisp!

  • 5
    Super fast shipping very nice trigger

    Ordered my trigger on a Sunday night and recieved it the following Wednesday. Sweet!

    Although I have not had a chance to put the trigger to practical use at the range it is apparent it is a well made product. Parts are nicly finished and very smooth when tested. Looking forward to ringing steel and punching holes.