BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(184 reviews)
SKU:
BCM-PNT-TA1
BCM® PNT Trigger Assembly AR15
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    Great for the price

    Can't think of a better trigger for the price. Even if it's not your favorite trigger it's worth the money.

  • 5
    Excellent value

    I am impressed by the quality and the fit and finish of the trigger I ordered, A great value for the price

  • 4
    PNT TRIGGER

    PNT TRIGGER IS A LITTLE BETTER THAN MY TRIGGER THAT CAME WITH MY AR. NOT AS MUCH AS I THOUGHT IT WOULD BE....

  • 5
    PNT Trigger

    Of all the mods I have done to my AR, this was the best one. Night and day improvement over my stock M&P trigger. I highly recommend this trigger.

  • 5
    Suprised

    I generaly prefer Timney triggers in an AR but was not in the mood for the price on this build. As such, I went with a respectable brand as a trial. I am impressed with this trigger. Clean, single stage brake without detectable creep. While the pull weight is higher than a Timney, the function and value of the BCM unit make up for this difference. This trigger is a vast improvement over stock AR triggers and worth every penny.

  • 5
    BCM PNT Trigger Assembly AR15

    Great trigger assembly! I plan on getting the entire lower kit for my next build.

  • 5
    Nice trigger

    No grit like on a standard mil spec trigger, but a little heavier than I would like. Still, overall quality is top notch

  • 5
    BCN PNT Trigger

    Awesome quality and smooth as butter. Buy this and Dont waste your money on a drop-in-trigger. Is that good.

  • 5
    this trigger is amazing

    this trigger is 10 times as smooth as the standard trigger that I replaced. especially for the price! Ithe will blow your mind how smooth and light the pull is and how crisp the reset is. I will never buy another brand of trigger.