BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(184 reviews)
SKU:
BCM-PNT-TA1
BCM® PNT Trigger Assembly AR15
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    Excellent quality

    Really well made, good looking and excellent crisp trigger.

  • 5
    Great trigger

    While the operating mechanism for this trigger is the same as any combat style, it's polished manufacture and superior coatings make the pull and recovery much more smooth and clean than that of stock triggers. Adding an aftermarket spring set makes this feel very close to the more expensive trigger assemblies. Awesome job as always Bravo!

  • 5
    outstanding trigger!

    What a fantastic upgrade from the stock AR trigger! The materials and coating are first class. The trigger pull and feel are impressive. Lighter pull, crisp with nice short reset. Very pleased! And BCM's customer service and shipping is the Best!

  • 5
    Excellent trigger

    I needed a new trigger and didn't want to pay for an expensive competition trigger for my coyote rifle. This is a great trigger with a crisp break and reset. Couldn't ask for more at such a reasonable price.

  • 5
    BCM PNT Trigger

    You folks were awesome as is the trigger. Prompt shipping and a quality product won't use another trigger from now on! Wish you had Uppers in stock as I need one for a Grendel build.

  • 5
    Trigger

    Nothing but the best from BCM!

  • 5
    Best trigger for the money.

    Zero creep, very smooth combat weight trigger. I bought two and am very satisfied.

  • 5
    Sweeeeeeeeet

    This trigger group is pretty awesome. Straight off the bat, you can't compare it to a high end Gisele trigger. Beyond that, it's great. The trigger is hand polished and smooth, and the Teflon one the whole shebang is a clever idea, and works. I had a little bit of trouble installing an after market safety with a 45 degree throw with the trigger because it's just a little thicker and blocks the tiniest portion of the hole for the safety, but I got it in there and now the whole thing is great. The trigger is solid. If your looking for a great trigger that doesn't cost you $230, get this. If it's BCM, it's quality.

  • 5
    looks good

    havent shot with yet but feels and looks good