BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(184 reviews)
SKU:
BCM-PNT-TA1
BCM® PNT Trigger Assembly AR15
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    PNT

    Much smoother than mil spec, one it breaks in no travel and crisp break. Well with it.

  • 5
    Stripped uppers

    These are nice when they are in stock. They say they are blemished, but you can hardly tell. Nicely priced and fast shipping.

  • 5
    BCM PNT Trigger AR15

    A very high quality appearing product. Time will tell on how well it works ad durability but it is a BCM product so I'm sure it will perform as advertised

  • 5
    BCM PNT Trigger Assembly

    A great, no creep, crisp let off trigger. A very good value.

  • 5
    Great trigger

    Great trigger no creepy grinding feel!

  • 4
    BCM PNT Trigger assembly AR15

    I was looking for a trigger better than the stock one on my Sig. This trigger is a good one. Not as good as my Giesle but better than the stock one. Definitely worth the money.

  • 5
    Kickass trigger

    I went through a couple different triggers for a SPR AR build and finally settled on this one, its the best of the three.

  • 4
    Good for the money

    I bought two of these for two guns and they feel a bit better than the standard mil-spec triggers, I hoped they would be better. The mil spec triggers already have several hundred rounds through them so I am hoping the PNT triggers get better with time.

    I plan on getting the entire lower parts kit with this trigger in the future for a lower I have. For the money I think they are a good value and whether or not you get improvement depends on the quality of the trigger you have now.

  • 5
    Excellent trigger

    Great trigger, smooth pull clean break. And at a great price. Can't beat this trigger for the price. Will be using this in future projects. Thanks bcm!