BCM® BFH 14.5" Mid Length Upper Receiver Group w/ KMR-A13 Handguard

MSRP: $967.95
Your Price: $769.95
(You save $198.00 )
(59 reviews) Write a Review
SKU:
BCM-URG-MID-14BFH-KMR-A-13
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition.
 
 
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
 
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

59 Reviews

Write a Review
  • 5
    14.5 Upper receiver

    Posted by Wolfgang on Dec 9th 2020

    Never disappointed with BCM products, first rate quality all the way, I'll be buying again very soon.
    Highly recommended!

  • 5
    perfection

    Posted by brett on Dec 3rd 2020

    Iam not new to the ar world. Several builds and complete rifles. Having said that the qc and fit/ finish on this upper is the stuff of legend quality product worth every penny and then some

  • 5
    BCM® BFH 14.5" Mid Length Upper Receiver Group w/ KMR-A13 Handguard

    Posted by Chris on Nov 29th 2020

    BCM never fails to satisfy and impress. Their quality control is the best in the industry in my opinion. In addition their customer support is good as well. Their products speak for themselves. I've purchased them for years. Their items are tools, meant to be used, and will do their job reliably.

  • 5
    BCM 14.5

    Posted by Thomas on Nov 11th 2020

    This upper is incredible. Put about 200 rounds through it and it's ran flawlessly. Absolutely perfect gun.

  • 5
    Professional Grade Tool

    Posted by John on Oct 14th 2020

    I have worked in a tactical environment for my entire adult life. The men I work with day in and day out are hard on their equipment. The worst feeling in the world is second guessing your weapon during a high risk situation, because you know you cut corners. The BCM hammer forged uppers are professional grade life saving tools. How they are able to provide such quality at an affordable price speaks volumes of the company as a whole. These weapons of for professionals. Run up get done up. Out.

  • 5
    BCM® BFH 14.5" Mid Length Upper Receiver Group w/ KMR-A13 Handguard

    Posted by Josh on Oct 4th 2020

    This won’t take long,....simply the best! I’ve owned numerous AR’s from a variety of companies, & nothing honestly compares. Not the easiest on the wallet, but if my life is on the line, it’s what I want in my hand. Thanks for the attention to detail & cutting no corners.

  • 5
    Great product, excellent company

    Posted by Avraham on Jul 1st 2020

    Lightning fast shipping, top quality product. It's BCM who could ask for more?

  • 5
    BCM BFH 14.5 w/ KMR A13 handguard.

    Posted by Jeffrey Natale on May 8th 2019

    I bought this upper to put on a complete BCM lower. Never disappointed in their products, always top of the line. If you’re looking for a weapon system you can trust your life to, its BCM. Hands down! The best there is!

  • 5
    Mid length KMR upper...

    Posted by anonymous on Apr 10th 2019

    Right to the point...BCM quality is second to none. I’ve relied on their rifles for years. Recently, I was put into harms way, and my teammates and I were ambushed. Two things saved us that day...training and our BCM rifles. These rifles work when it matters the most. Thank you BCM for the quality products you manufacture.