BCM® BFH 14.5" Mid Length (ENHANCED Light Weight) Complete Upper Receiver Group w/ KMR-A13 Handguard

MSRP: $1,086.95
Your Price: $819.95
(You save $267.00 )
SKU:
BCM-URG-MID-14-BFH-ELW-KMR-A13
Caliber:
5.56 NATO
Barrel Length:
14.5in
Barrel Style:
BFH
Handguard:
KMR-A13
Barrel Profile:
Enhanced Light-Weight
Stock Status:

About the BCM® BFH 14.5" Mid Length ELW Complete Upper Receiver w/ KMR-A13 Handguard

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount

Manufactured by Bravo Company MFG, Inc. (BCM)

These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

Cold Hammer Forged Barrels

This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)

M4 Feed Ramp Barrel Extension and Upper Receiver

In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps.
 
This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.

T-Marked Upper Receiver

The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

USGI 1/7 Twist Rate

The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)

BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.

Chrome Bore and Chamber

One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

Manganese Phosphate Barrel Finish

Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.

5.56 NATO Chambers

The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

HPT / MP Inspected Barrels

Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.

Shop Related Products:

Want to see more upper receivers? Click the links below to view more BCM® AR complete uppers!

 

Bravo Company builds: Life Saving Tools™
 
Copyright 2023 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

175 Reviews

  • 5
    Kar complete upper

    Absolutely fantastic

  • 5
    wonderful

    If you are expecting anything less than perfect you don't know BCM. Ultra lightweight

  • 5
    To be expected

    Let's be real here, It's BCM. The quality of the products are always exactly what they should be. MILSPEC and meant to work all the time everytime. Fit an finish always perfect. Shipping on in stock items is always fast.

  • 5
    14.5 inch uppper

    Love this upper, definitely notice the bcm difference, will be purchasing more.

  • 5
    Amazing upper

    This was the upper the I had purchased for my first build and it is beyond words to describe how well made the product truly is, for me at least. My only gripes with it was that I did not purchase the bolt carrier group and had to put one of a different brand.

  • 5
    Top tier upper

    500 rounds in and I’m happy. Not my first BCM setup and won’t be my last.

  • 5
    14.5 free float rail

    I have bought many parts from these people and they hands down make the best products. Always very satisfied with my purchases.

  • 5
    BCM 14.5” complete upper receiver

    Amazing price for an amazing product, with a top of the line upper receiver I would expect nothing less. Many options to customize to your liking with the BCG and CH as well as any comp mods you may want. The build is amazingly light and maneuverable when placed on a full lower receiver and performs beautifully at the range.

  • 5
    Bcm upper

    I have bought several items from bcm and have not been disappointed yet!!