BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(150 reviews) Write a Review
Maximum Purchase:
10 units
Stock Status:


BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.



The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.



An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.



Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.


This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.


The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.

As with all BCM products, Made in the USA.

***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

150 Reviews

  • 4
    BCM Trigger

    Posted by Juan on Apr 29th 2020

    I purchased a couple of these for builds since the ACT trigger is out of stock. Price is comparable but this doesn’t come with different weight springs and has a little more creep before break. The ACT is crisper but the BCM is still a good trigger for the mula.

  • 5
    Bravo Company PNT Trigger

    Posted by Wesley Asay on Apr 28th 2020

    This review is for 2 PNT Triggers I ordered and received in a timely manner. Unfortunately due to the COVID-19 impacts to logistics, my uppers won't be arriving for 3 - 4 more weeks. So this review will be for the installation and action of the trigger. I installed the triggers in my 2 Aero Precision M4E1 lowers. Installation was a breeze. The action and feel of the PNT trigger is perfect for me personally. There is a very smooth 4.7 lb draw with very little creep before a crisp release of the hammer. Trigger reset is very positive. The Nickel Teflon finish shows great workmanship and appears to have a consistent thickness of the coating across the entire piece. This trigger is not a $300 trigger. This is a $70 trigger that acts like a $300 trigger. Love it & highly recommend it.

  • 5
    The best bang for your buck

    Posted by Tim on Apr 27th 2020

    First, I havent shot the trigger yet. Just received it this weekend. 4/25/20. Took out a mil-spec standard trigger. That trigger had about 3-4 gritty spots on the take up and the wall was stiffer through to the break. This trigger has no gritty spots, extremely smooth and you can tell that polishing is there. The break is consistent pressure as the take up. No sensation of having to push through a wall before the break. Installed flawlessly and as always, Fast shipping! Thank you Bravo Company. This is on my 18" PSA 1:8 .223 Wylde.

  • 5
    BCM PNT trigger assembly

    Posted by Pat on Apr 24th 2020

    Wow !! And Whoa!!
    The difference was felt immediately and I would recommend this trigger assembly to everybody.
    Price is right for me and no more grittiness.

  • 5
    PNT Trigger

    Posted by Preston on Mar 15th 2020

    Very easy to install. High Quality. Fair price. Very hard to pass up. Definitely recommend.

  • 4
    BCM PNT trigger

    Posted by PERRY PETERSON on Jan 2nd 2020

    As advertised. Probably the best mil spec trigger on the market. Besides it's doppelganger ALG.... Basically same trigger better price... And as always shipped fast.... Thank you BCM...

  • 5
    Customer review

    Posted by Daniel crowe on Aug 26th 2019

    Review body is empty

  • 5
    Very nice!

    Posted by Robert Shrader on Aug 4th 2019

    Fast service! Ordered on a Tuesday night and received it in Friday's mail. Still a mil-spec pull weight, but extremely smooth with a clean break. I'm a believer!

  • 5
    Great trigger for M4

    Posted by anonymous on Jul 22nd 2019

    First of all, this is my second purchase of this item. A lot cheaper than other comparable triggers. Great price and outstanding customer service. I received delivery of this item in a few days. Thanks.