BCM® MK2 BFH 14.5" Mid Length Upper Receiver Group w/ MCMR-13 Handguard

MSRP: $979.99
Your Price: $781.99
(You save $198.00 )
(8 reviews) Write a Review
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
Bravo Company builds:  Life Saving Tools™
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
Featuring BCM’s Patent Pending MK2 Upper Receiver
This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.   A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

8 Reviews

Write a Review
  • 5
    BCM BFH 14.5 Mlok

    Posted by Cory on Aug 29th 2020

    Looks to be amazing quality as to be expected from BCM. Haven't shot it yet but it mates perfectly to my Aero lower. Will update after 500 rounds

  • 5
    Top Notch Quality and Service

    Posted by AC on Aug 26th 2020

    I'm very impressed with the quality of parts. Fit and finish are phenomenal and top notch. This is my first BCM and I'll definitely be purchasing more of their products for future builds. The 14.5 inch mid with the ELW barrel runs perfectly with various loads. I have a traditional BCM bolt and lightweight bcg w/nitrade coating and both run perfectly.

  • 5
    Upper Receiver Group

    Posted by Kyle Magdiel on Aug 20th 2020

    Just what you’d expect from BCM. Great accuracy, soft shooting( but that’s cuz I tuned my gas system) so far seems reliable. I only have a few hundred rounds down the pipe so far, will return for an update after I get to 5k

  • 5
    14.5 mk2 barrel

    Posted by crispin proctor on Aug 10th 2020

    absolutely beautiful piece of equipment, slim hand guards and nice barrel perfect size and good quality construction. I will be buying again for future builds.

  • 5
    BCM® MK2 BFH 14.5" Mid Length Upper Receiver Group w/ MCMR-13 Handguard

    Posted by Jr on Jul 31st 2020

    Been looking for this upper for a month and they have been sold out, luckily the people at BCM kicked butt and pumped more out and I happen to go onto their website and found this upper back in stock. This thing rocks everything about it is perfect, fit and finish A+ , hand guard (mlok) A+ , mk2 upgrades A+, shipping A+ , BCM you have a life long customer right here

  • 5
    Best upper I have ever gotten

    Posted by Kevin on Jun 15th 2020

    I’m very pleased with my upper next AR I’m gonna build I’m definitely going to get another BCM upper I was amazed by how fast the product was shipped I place my order Friday and the following Friday it was at my door I’m really glad I chose BRAVO COMPANY :)

  • 5
    Mk2 complete upper bfh

    Posted by Anonymous on Apr 15th 2020

    REAL NICE. BCM does not F around. Buy one, there is no chance you will disappointed. Someone who has pride in their work/builds these things.

  • 5
    MK2 upper

    Posted by Spencer on Mar 19th 2020

    Great quality from bravo company as expected, you can definitely feel the added mass soild asf I see no reason not to go with the MK2 upper.