BCMGUNFIGHTER™ Compensator MOD 1 - 7.62 / 300 Blackout

MSRP: $110.00
Your Price: $99.95
(You save $10.05 )
(27 reviews) Write a Review
SKU:
BCM-GFC-MOD-1-762
Stock Status:

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

 

The BCMGUNFIGHTER™ Compensator Mod 1 - 7.62 / 300 AAC Blackout

 

  • Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
  • Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter
  • Includes a Crush Washer
  • Should be installed by a qualified armorer.

 

 

Threaded 5/8 x 24 for 7.62mm AR10 and many 300 AAC Blackout barrels


In order to install the muzzle device, you will need a "thin" wrench. A standard armorer's wrench or box wrench is too thick.

 
Please note:

The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contains not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.

 

Due to the new and unique design of the BCM® compensators, the user may notice small pits on the interior surfaces of the compensator. This is normal. Most designs do not impede the exit flow very much, while the BCM approach is exactly opposite. These surfaces are specifically designed to operate within the environment found at the muzzle, and are intended to allow significant amounts of deterioration before any loss of performance is seen/felt. These compensators have been tested through many thousands of rounds, and while the wear surfaces may give pause to some users, trust when we say that it's normal.

 

 

Made by Bravo Company MFG, Inc. (BCM®)
Patent Pending
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

27 Reviews

  • 5
    Great product

    Posted by JD Diato on May 26th 2020

    Excellent quality

  • 4
    Fine compensator

    Posted by Jaycen Rigger on Jul 17th 2019

    I tend to get flashes when shooting supersonics, but it is a 9" barrel.

  • 5
    Customer review

    Posted by Gary Ingraham on Feb 19th 2019

    Review body is empty

  • 5
    Customer review

    Posted by Juan Guerrero on Dec 18th 2017

    Review body is empty

  • 5
    Perfect for .300 AAC

    Posted by BK Hammer on Oct 27th 2017

    Ordered two of these. One for 8.5 in pistol length and second for 16 in barrel. (Make sure you have the correct "thin" 3/4in box wrench to tighten.)

    Works fine on pistol length but is magnificent on the 16 in barrel. Greatly noticeable recoil and sound reduction. Smooth as silk back on target.

  • 4
    Nice comp

    Posted by Erik Porter on Oct 27th 2017

    I chose to go with the comp until i can get a silencer. Havent fired enough rounds to say how affective the design is compared to other comps I've used on other rifles, but so far I like it.

  • 5
    Nice product

    Posted by J on Oct 27th 2017

    Using it on an 8 inch 300 blk barrel. No muzzle flash. Very little recoil. Was nice that they included a new crushwasher.

  • 4
    Comp Mod 1 7.62

    Posted by Robert Stringer on Dec 27th 2016

    Very clean and we'll machined. I have put about 500 rounds through it and I can feel the difference in my rifles report. Thanks.

    Robert Stringer
    USAF RETIRED, TSGT

  • 5
    Product.

    Posted by Seth Leyba on Dec 22nd 2016

    Excellent service, better product.