BCM® Standard 14.5" Mid Length (ENHANCED Light Weight) Upper Receiver Group w/ MCMR-13 Handguard

MSRP: $778.95
Was: $778.95
Now: $598.95
(You save $180.00 )
(11 reviews) Write a Review
SKU:
BCM-URG-MID-14ELW-MCMR-13
Stock Status: In Stock

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 


HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2019 Bravo Company MFG, Inc.

11 Reviews

  • 5
    As expected

    Posted by BillyBGoode on Aug 20th 2019

    Product and service as expected. Superior. Form, fit and function are all outstanding. It’s the cherry on top of my most recent AR build.

  • 5
    Upper Rexeiver Group

    Posted by William D Keepers on Aug 6th 2019

    I hit a minor bump in the ordering process but otherwise the experience was excellent!
    Packaging was outstanding ... and very fast.

  • 5
    Love It

    Posted by Jeffrey Thornton on Jul 17th 2019

    Surprised it took me this long to buy Bravo Company. This upper has functioned flawlessly for 500+ rounds now. I’ll be back for more.

  • 5
    Customer review

    Posted by Michael Kule on Jun 15th 2019

    Review body is empty

  • 5
    Customer review

    Posted by Matthew Wilson on Jun 4th 2019

    I have been a police officer for 17 years and a member of a tactical operations team for the last 10. I have had many AR platform rifles that were great but the BCM is top notch. I have added confidence with this weapon in my hands and truly appreciate the workmanship that was put into this rifle. God bless all of you for your hard work and dedication.

  • 5
    Worth every cent

    Posted by Chris on Apr 10th 2019

    Impossible to find a better quality product for the price. I would bet my life on a bcm. Fit and finish were immaculate, will be buying more uppers in the near future.

  • 5
    Purchase

    Posted by Ethan on Apr 10th 2019

    It’s true they never answer the phone but they did answer their email in a timely manner. Now to get to the gun I haven’t made such a good purchase in a long time! Love everything about it!!

  • 5
    14.5” standard ELW

    Posted by Joseph on Apr 10th 2019

    Excellent quality, always happy with BCM. I think my Enhanced Lightweight is my new favorite Build actually.

  • 5
    Customer review

    Posted by Samuel Malone on Jan 28th 2019

    Review body is empty