BCM® Standard 14.5" Mid Length (ENHANCED Light Weight) Upper Receiver Group w/ KMR-A10 Handguard

MSRP: $768.95
Was: $768.95
Your Price: $588.95
(You save $180.00 )
(21 reviews) Write a Review
SKU:
BCM-URG-MID-14ELW-KMR-A-10
Stock Status: In Stock

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2019 Bravo Company MFG, Inc.

21 Reviews

  • 4
    Customer review

    Posted by anonymous on Apr 9th 2019

    Haven't had a chance to shoot it yet but it's much lighter than my 16" stainless upper. Finish is a nice dark black anodizing. Everything looks great and cycles smoothly by hand, can't wait to use it in my upcoming carbine course!

  • 5
    Customer review

    Posted by anonymous on Mar 29th 2018

    Review body is empty

  • 5
    Bcm upper receiver 14.5

    Posted by Chris marshall on Oct 27th 2017

    Was so excited to get this complete upper from bcm ! I am 100% satisfied. Highest quality I have seen , I'm hooked on bcm and will be buying more from this company . Thank you bcm

  • 5
    BCM upper

    Posted by Thomas M. on Oct 27th 2017

    Nothing but the best from BCM, top notch quality and amazing performance

  • 5
    Amazing accuracy and reliability

    Posted by Kenneth Koller on Oct 27th 2017

    10 shot groups with everything ran 4 inches or less at 100 Yds with 3X Acog. 45 gr to 77 gr from 6 manufacturers. 62 gr and 77 gr IMI went into 1.5 inches with 10X Leupold. This with a BCM factory trigger. Some 5 to 6 shot groups would touch then I would send the last few rounds wide. I am by no means a great shot. I have no doubt this upper is better than me. Ran 2000 rounds in 5 days with minimal cleaning and oiling. Not a single stoppage. My next upper will definitely be a BCM.

  • 5
    Upper Receiver Group w/BCM

    Posted by Lance Samuelson on Apr 17th 2017

    Love it.

  • 5
    Awesome quality

    Posted by anonymous on Dec 28th 2016

    Used this upper on my BCM lower for my first AR15 build and it is AWESOME! Fitment is spot on, finish is great, and the quality is amazing.

  • 5
    Upper Assembly 5.56

    Posted by Richard Williams on Dec 28th 2016

    This is the second AR I have built with all BCM components. All are fantastic. I just wish I had been carrying this rifle during 1965 - 1972!

    Thank you, BCM!!

  • 5
    The best I've ever shot!

    Posted by Damon G. on Oct 13th 2016

    I purchased this upper as part of a build contest between several friends at work. The contest was to build a better patrol rifle then the colt 6940's that our agency issues to our deputies. A little back ground on me, I've been in law enforcement for 10 years and a member of my agaencies SWAT team for 2 years.

    This upper is absolutely fantastic!! I've put 1000 rounds through it so far without a single malfunction. It is the most accurate upper I've ever shot. I've built 6 AR's over the last several years and carry a colt 6940 on patrol and for SWAT. This upper is very light and well built. I can't speak highly enough about the quality. It was worth every penny!!