BCM® Standard 12.5" Carbine Upper Receiver Group w/ KMR-A10 Handguard

MSRP: $873.35
Your Price: $675.35
(You save $198.00 )
(23 reviews) Write a Review
SKU:
BCM-URG-12-KMR-A-10
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammunition. 

 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2019 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

23 Reviews

Write a Review
  • 5
    12.5" upper

    Posted by Cliff on Jan 18th 2017

    tough to beat up close, light and reliable...

  • 5
    Great Product

    Posted by William Combs on Dec 28th 2016

    When the product showed up - looked better than on the website - Have shot 100 rds thru it and absolutely no problems or flaws - Highly recommend - Will be buying other products from the company

  • 5
    Bravo Company- Complete Lower

    Posted by Mike Konn on Oct 29th 2016

    Great complete lower!! Amazing quality!
    Excellent customer service and quick delivery!!
    Thank you!

  • 5
    Typical BCM

    Posted by Will on Oct 13th 2016

    If you're on the fence about a BCM product, I say 'do it'. The quality of materials, attention to detail, and overall workmanship make BCM uppers and equipment a great deal for a very reasonable price. I've purchased half a dozen BCM uppers over the years and never been disappointed.... Do it.

  • 5
    Awesome upper

    Posted by Dalton Aguilar on Sep 22nd 2016

    The upper has great fit and finish. The upper seems extremely accurate for a 12.5 barrel. Zero malfunctions after 500 rounds and the KMR rail is so light and comfortable. The customer service is the best, I asked if Paul could sign some of the swag for me that they send in the box. He actually took time out of his day to sign a hat for me, he's the real deal. Thumps way up.

  • 5
    Best Customer Service ANYWHERE

    Posted by James M. White, Jr. on Sep 22nd 2016

    These guys know their business and and have top notch customer service. Due to certain changes I had to return this upper for another with a longer barrel. They fixed me up no questions asked and turned everything around in under 7 days! Awesome company who will have all the business I can afford to give them.

  • 5
    BCM uppers are gassed right.

    Posted by Nate O. on Sep 22nd 2016

    Accuracy is more than expected, and reliability is perfect so far.

  • 4
    Awesome upper, great company

    Posted by J on Sep 22nd 2016

    Shooting volume the rail gets hot. The keymod section at 1 & 11 are useless except for the keymod qd sling attachment. Thought I could mount a rail, I could, with a light attached, definitely not. The rail basically touches the top rail. Accuracy is insanely good with ae 556. It's light, thin, I'm so glad I bought it. I'm buying and recommending nothing but BCM for di guns and their accessories. All the extras are a classy touch. Would've bought the upper with the aluminum mix, but this is cheaper and was in stock.

  • 5
    12.5 upper

    Posted by Denny Munroe on Aug 8th 2016

    Everything was perfect I could not ask for better