BCM® BFH 11.5" Carbine Upper Receiver Group w/ KMR-A10 Handguard

MSRP: $844.95
Was: $844.95
Now: $664.95
(You save $180.00 )
(46 reviews) Write a Review
SKU:
BCM-URG-11-BFH-KMR-A-10
Stock Status: In Stock

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 


Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
 
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.

46 Reviews

  • 5
    Customer review

    Posted by anonymous on Oct 16th 2019

    Review body is empty

  • 5
    Customer review

    Posted by Robert Badali on Aug 26th 2019

    Review body is empty

  • 5
    Top notch quality

    Posted by Ryan Roy on Jul 22nd 2019

    I only buy BCM because I know I can trust them. Quality and customer service is number one!!!

  • 5
    BCM greatness

    Posted by David B on Jun 4th 2019

    Put close to 1000 rounds through this upper in the past 2 weeks of having it. It’s my second BCM, and just like the first it has been completely 100% perfect. I’m a BCM fanboy for life now.

  • 5
    Cold Forged 11.5 Carbine

    Posted by Sanford Crayton on May 8th 2019

    Top notch piece of equipment. Obviously EXTREMELY difficult to obtain but worth the wait. Stoked to have it in the collection.

    -San

  • 5
    Excellent as always

    Posted by Chad Cartwright on May 8th 2019

    This is my second BCM upper. Super fast shipping. Excellent quality. Always the best!

  • 5
    Great for sbr or pistol

    Posted by Zach on Apr 10th 2019

    After doing many hours of research and reading reviews I decided to go with bcm and I’m so happy I did. Great quality fast shipping and just all around great company and great products.

  • 5
    Can’t get any better.

    Posted by The Annoyed Man on Apr 10th 2019

    This is my second BCM upper—the other has a 20” gov’t profile barrel—and I couldn’t be happier. The 11.5” barrel produces reasonably-sized groups for an AR15—2 MOA at worst, and sometimes better, using XM193 and M855 ball. Haven’t tried it with 77 grain OTM yet. Fit and finish is excellent. I wouldn’t hesitate to recommend this particular upper to anyone.

  • 5
    Awesome stuff

    Posted by Stetson Taylor on Oct 21st 2018

    Really good Quality. Couldn’t get anything better