BCM® PNT Trigger Assembly AR15

MSRP: $70.00
Your Price: $65.95
(You save $4.05 )
(184 reviews)
SKU:
BCM-PNT-TA1
BCM® PNT Trigger Assembly AR15
Stock Status:

 

BCM® PNT™ Trigger Assembly (Polished - Nickel - Teflon)

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.

 

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec.

 

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

 

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

 

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.

 

The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.


As with all BCM products, Made in the USA.



***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

184 Reviews

  • 5
    Excellent Craftsmanship!

    The BCM PNT Trigger Assembly was a replacement for a factory trigger group. The PNT coating and overall craftsmanship on the parts is amazing. Very easy install if you know your way around an AR-15 and the fit and function is flawless. I will replace every trigger group in my various AR pattern rifles/pistols/SBRs with this part!

  • 5
    Great trigger.

    The BCM PNT trigger assembly is a significant improvement from the standard milspec unit. The fit and finish, polished and coated surfaces make all the difference in control and confidence in training, target, and combat situations. This is a great combat trigger and at a price point that makes it well worth the upgrade.

  • 5
    First build

    Best site for my first AR build! Quality parts and fast shipping!

  • 4
    Satisfied

    Site is well laid out, good product and packaging. I ended up having 2 separate orders, and on the second order, it wouldn't let me complete the order until I gave them permission to save my payment info. Not a big deal in the end, but the page never told me that's why it wouldn't complete, and it ended up taking quite a while to figure that out. That being said, will still order products from BCM.

  • 5
    Better than I expected

    I put this on a recent SBR build that is meant for home defense. Wouldn't be shooting any Precision so a 2 stage didn't make sense. I'm not sure what I was expecting other than a milspec-esque pull. Boy was I pleasantly surprised. This thing is really crisp for a 65 dollar trigger. It was a toss up between this and the ALG trigger. It's not mushy at all. Barely any takeup either. There's a wall then it breaks cleanly and a nice tactile reset. For 65 bucks you'd be nuts not to give this a try.

  • 4
    Awesome GI trigger

    The pull is smooth, no creep, pull is heavy but not too, where a GI pull weight should be, which is great for a weapon built for defensive purposes. The reset has a small amount of grit to it but It's not entirely broken in yet so I can't comment on that definitively quite yet. Over all, I'm happy with.

  • 5
    Love there stuff

    It's pretty slick, I love it. Clean break, reset is not as clean as I would have liked

  • 3
    BCM PNT Trigger Assembly

    I had this item installed on an SBR and, although, I was impressed with the quality and clean break I was disappointed with the excessive weight of the trigger pull. Measuring at 7 lbs. 6 ozs. trigger weight was more than desired.
    I'm a loyal and lifelong BCM client and this is the only product I've ever been disappointed with.

  • 5
    worth every penny

    Bought a parts kit with trigger and loved it so much I bought a trigger for my other gun. Nice and crisp. Best milspec trigger you can buy.