BCM® MK2 BFH 14.5" Mid Length (ENHANCED Light Weight) Complete Upper Receiver Group w/ QRF-12 Handguard

MSRP: $1,117.55
Your Price: $844.99
(You save $272.56 )
SKU:
BCM-MK2-URG-MID-14-BFH-ELW-QRF12
Caliber:
5.56 NATO
Barrel Length:
14.5in
Barrel Style:
BFH
Handguard:
QRF-12
Barrel Profile:
Enhanced Light-Weight
Upper Receiver:
MK2
Stock Status:

Out of stock

About the BCM® MK2 BFH 14.5" Mid Length ELW Complete Upper Receiver w/ QRF-12 Handguard

Manufactured by Bravo Company MFG, Inc. (BCM)

These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

Featuring BCM’s Patented MK2 Upper Receiver

This proprietary design offers enhanced rigidity over the USGI product.  The increased rigidity limits barrel deflection which aids in consistency/accuracy.   Less flex also reduces premature damage, wear, and failure of bolt lugs from misalignment.   A gas expansion chamber is machined above the charging handle track, combined with dual vents machined at the rear (each side, above charging handle latch) help to redirect and vent gas away the shooters face. U.S. Patent Numbers: 10670355, 10677549, D888182

Cold Hammer Forged Barrels

This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)

M4 Feed Ramp Barrel Extension and Upper Receiver

In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps.
 
This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.

T-Marked Upper Receiver

The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

USGI 1/7 Twist Rate

The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)

BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.

Chrome Bore and Chamber

One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

Manganese Phosphate Barrel Finish

Barrels are parkerized with the manganese phosphate finish per Mil-Spec. Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.

5.56 NATO Chambers

The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

HPT / MP Inspected Barrels

Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.

Shop Related Products:

Want to see more upper receivers? Click the links below to view more BCM® AR complete uppers!

 

Bravo Company builds: Life Saving Tools™
 
Copyright 2023 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

7 Reviews

  • 5
    14.5 mk2 ELW QRF

    Absolutely love this upper. I paired mine with their bcg and mod 3x3 charging handle and what a sweet setup. If you’re looking for a sweet shooter that will never let you down and get talked about every time you pull it out this is it. Just wish I had received all the cool swag everyone mentioned, all I got was some stickers. Nevertheless will continue business with bcm!

  • 5
    BCM® MK2 BFH 14.5" Mid Length (ENHANCED Light Weight) Upper Receiver Group w/ QRF-12 Handguard

    Phenomenal upper group and very professional presentation. This upper arrived exactly as described, within five (5) days of purchase, securely packaged for any shipping concerns and already lubed...with the best smelling oil available! The p in & welded comp is top notch craftsmanship. Contents included all of the supporting paperwork possible and several pieces of assorted BCM swag. I could not be more happy with this purchase.

  • 5
    Great Upper Group

    Consistent with their reputation, this is a great product from BCM. Received the order within five business days and quickly put a few hundred, flawless rounds through it. As mentioned in another review, this ELW barrel heats up quickly but not so much quickly to make an extremely huge difference between it and a "normal" weighted barrel. Very satisfied with the purchase.

  • 5
    Bcm upper

    Product ships fast and arrives as advertised. Fit and finish is right and tight. Mated this upper to a bcm lower and I have a reliable, accurate, and beautiful rifle.

  • 5
    14.5” ELW 12” QRF MK2

    Great product

  • 5
    So far so good

    So far I'm extremely impressed at how the customer is thought of.
    • Decent packaging
    • cool merch
    -calander
    -hat
    -stickies
    -posters
    -shitter readers
    -pamphlet
    I'm in the midst of testing my new upper group, But so far I'm pleased with the quality and attention to detail. Outstanding BRAVO CO.
    PLT 1035 BRAVO NATION!! SEMPER FI Bravo CO.

  • 5
    Highly recommended

    Flawless fit and finish on the upper. Really intrigued by the improvements on the MK2 upper receiver. Fantastic product just like everything else BCM produces.