BCM® BFH 16" Mid Length Upper Receiver Group w/ MCMR-15 Handguard

MSRP: $978.95
Your Price: $780.95
(You save $198.00 )
(23 reviews) Write a Review
5.56 NATO
Barrel Length:
Barrel Style:
Stock Status:

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
Bravo Company builds:  Life Saving Tools™
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

23 Reviews

  • 5
    16 inch barrel 15 inch mcmr hand guard upper receiver group

    Posted by Rj on Aug 8th 2021

    Very fine product. Buy from BCM with confidence.

  • 5
    Good to go

    Posted by Rob Ma on Mar 1st 2021

    Just recieved this upper and I am very happy; fit and finish are great (slight cant on the handgaurd in relation to the upper reciever, already fixed!) :) Swapped out the forward assist and flash hider and I am all good to go. Can not wait to try it out on the range. Thanks BCM for making available such a great product!
    Keep up the good fight!


  • 5
    BCM 16” midlength BFH, MCMR upper

    Posted by Dave on May 1st 2020

    I’ve been lusting after one of these for a few years. Seems like I’m always settling on something different that I can get used or on some really good sale. After 8 years in the military and 12 years as a cop I’ve had, been issued, used, shot lots of different uppers, lowers and complete rifles of countless brands and several manufacturers. Out of the box, after an initial cleaning and about 100 slow, controlled rounds this BCM upper has produced the best groups at 50, 100, 200 and 300 yards by far.

    I’m up to about 2100 rounds’ish at this point and only had one failure to feed that happened in the first magazine. It’s lighter than I thought it would be considering it’s not the lightweight model and I haven’t really noticed any decay in accuracy after the barrel heats up.

    After the barrel the rail is probably my favorite part of the upper. It came assembled perfectly straight and solid. The rail is currently carrying a Surefire m600 scoutlight, pressure switch and a magpie MBUS pro from sight, and a QD sling attachment so, not a lot of weight. A few guys I work with have the same rail with lots of other stuff attached and supported my the rail and it holds up great for them.

    I guess I’ll end by saying this is by far the very best upper I’ve ever owned or used. I have already recommended this to co-workers and buddies and would also highly recommend it to anyone reading this review while considering purchasing one. It’s well worth the money. I’d buy again and will probably continue to get assembled uppers from BCM In the future.

  • 5
    Customer review

    Posted by anonymous on Sep 15th 2019

    Great service, Fast shipping and wonderful shooting platform. Would/will buy again.

  • 5
    Complete Upper

    Posted by B. Eby on Sep 3rd 2019

    Exceptionally smooth and highly satisfied with it. The mod 0 comp has a good pew pew to it but keeps down muzzle and target in view.

  • 5

    Posted by anonymous on Sep 3rd 2019

    It’s a BCM. Top quality for a reasonable price. You can’t go wrong with this upper.

  • 5
    Very Impressed!

    Posted by S. Miller on Sep 3rd 2019

    Although I haven't had the chance to fire my upper yet I can tell you that the quality, fit and finish are very nice. I have built several AR's but this is my first BCM upper, I am sold, no need to look any further. The package also contains many logo items that I will be proud to display. Thanks BCM!

  • 4
    Shipped fast

    Posted by J on Aug 29th 2019

    Review body is empty

  • 5
    Very happy so far!

    Posted by Will on Aug 20th 2019

    Have only been able to take it the range once so far, but very happy! And all the Swag that BCM included was like the cherry on top of a sunday!

    This is my 2nd BCM upper (other is an 18inch SS precision barrelled) and I remain impressed by the quality of both.