BCM® BFH 14.5" Mid Length Upper Receiver Group w/ MCMR-13 Handguard

MSRP: $967.95
Your Price: $769.95
(You save $198.00 )
(23 reviews) Write a Review
SKU:
BCM-URG-MID-14BFH-MCMR-13
Caliber:
5.56 NATO
Barrel Length:
14.5in
Barrel Style:
BFH
Handguard:
MCMR-13
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

 
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
 
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

23 Reviews

  • 5
    Customer review

    Posted by anonymous on Jun 15th 2019

    Review body is empty

  • 5
    Charging handle

    Posted by Sheridan on Jun 4th 2019

    I dont remember which number the charging handle is but I have the large latch ambi. I have seen several snapped on Facebook groups that I'm in I swapped it for my Rainer arms. That's the only con. The upper is amazing. The quality everything I can't describe how happy I am except for the charging handle rumblings I'm hearing I do like the feel of it but was concerned about reliability of the charging handle. Put 1000k through it in one session. Flawless no recoil with the battlecomo 1.5 . The best gun purchase i ever made the best. BCM is love. Got questions look up garand thumb on youtube

  • 5
    Custom Install / Customer Service / Quality

    Posted by JL on Apr 10th 2019

    I ordered another BCM upper to complete my BCM lower I had purchased and ordered the Surefire Warcomp permanently installed on a 14.5" barrel. I had left in the notes to time it for a left handed firer because of the way the Warcomp is manufactured. My order shipped almost immediately the next day and I was worried that it would arrive without having been timed how I asked and I'd be left with sending it back. My upper arrived a few days later, timed exactly how I asked for with perfect workmanship! BCM quality is outstanding and they strive to do things right. I'll be a customer for life!

  • 5
    Bcm 14.5 mid length

    Posted by Victor Fox on Apr 10th 2019

    I got the BCM 14.5 midlength and a mod0 lower, rifle runs flawlessly and barely required adjustments to zero.

  • 5
    14.5 mid 👍🏻👍🏻

    Posted by Zac on Apr 10th 2019

    Bcm is top notch and their fit and finish are outstanding. This upper so far had been a very smooth shooter and looks amazing! Great service, high end quality, for a great price! Highly recommended!! I give it 2 thumbs up 👍🏻👍🏻!!

  • 5
    First AR-15/Best AR15

    Posted by Blake Root on Apr 10th 2019

    Ordered my upper and lower on a Friday and received both by the Friday of the very next week. Ordered a 14.5 with a pin and welded surefire muzzle brake. It came in perfect. I cleaned and lubed the rifle before taking it out to shoot. Didn't find any carbon except for a small bit inside the bolt itself and a small bit in the bolt carrier. This was a great find to me because that must have meant they test every single upper before shipment. That's awesome. I emailed customer service before and after the order and they responded very quickly. I will be ordering from BCM again when I can afford an sbr upper and get the paperwok done. If this review is read, I do have one recommendation. I loved having the option to have a muzzle brake pin and welded to my 14.5. I would love to see that option added to other upper lengths like 10.5 and 11.5. Would love to be able to order an sbr upper with a surefire muzzle brake already added.

  • 5
    Customer review

    Posted by Alex Kviklys on Mar 9th 2019

    Review body is empty

  • 5
    14.5 midlength upper

    Posted by Morgan Griffin on Jan 15th 2019

    super solid sweet shootin son of a gun.

  • 5
    Phenomenal product !!!!!

    Posted by Robb Thomas on Sep 3rd 2018

    Just shot my first 100 rounds thru it and I’m in love.
    Thank you Bravo Company on my first AR-15 build.