BCM® BFH 14.5" Mid Length (ENHANCED Light Weight) Upper Receiver Group w/ MCMR-13 Handguard

MSRP: $1,011.95
Your Price: $769.95
(You save $242.00 )
SKU:
BCM-URG-MID-14-BFH-ELW-MCMR-13
Caliber:
5.56 NATO
Barrel Length:
14.5in
Barrel Style:
BFH
Handguard:
MCMR-13
Barrel Profile:
Enhanced Light-Weight
Stock Status:

Out of stock

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 


HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

137 Reviews

  • 5
    14.5 ELW MCMR

    Pure Badassery

  • 5
    MCMR 14.5 upper

    Fit, finish and most important, performance are Perfect so far. I only have maybe a couple of hundred rounds thru it. Running .556 govt. ball, flawless function and accurate. Great price, top shelf product.

  • 5
    Awesome

    This is the second BCM complete upper I have bought along with many other parts. I have Put a few rounds through it and it didn’t disappoint. I haven’t grouped it with a magnified optic but my other BCM upper nearly shoots half minute. Expensive but worth every penny. I can’t commit on the hammer forged barrel it was all that was in stock when I ordered.

  • 5
    BCM 14.5 ELW: best upper and really accurate

    So I recently purchase this upper since I bought their lower to match it. I was shooting two psa and ballistic advantage and I wanted to give Bcm a try since everyone recommends them. Man, this upper blow the others one off the water. For one, Bcm check quality control really well and the finish is so good when you receive the upper. The upper is super accurate and I was getting sub moa accuracy. Also it’s really light but doesn’t sacrifice accuracy. I now know how an Ar 15 accuracy should be in first place. Bcm definitely earn my respect and this rifle was gas perfectly. Such a magical uppers shouldn’t exist. In future, I’m going get another upper from bcm.

  • 4
    Great Upper but...

    To prove I like this upper; I have bought it 5 times. The only thing is 2 times I had issues. One time I got one with some new comp on it I never seen that I really did not like it. It wasn't the comp mod 1 I ordered. Credit BCM they allowed a return, but was the comp actually a manufacturing mistake? The next time it had a larger amount of wobble then I expect from the BCM QC and tolerances that were on the others. I sold it for a loss and bought a new one that is perfect. That is my experience and even with those issues I'd do it again.

  • 4
    Great Upper but...

    To prove I like this upper; I have bought it 5 times. The only thing is 2 times I had issues. One time I got one with some new comp on it I never seen that I really did not like it. It wasn't the comp mod 1 I ordered. Credit BCM they allowed a return, but was the comp actually a manufacturing mistake? The next time it had a larger amount of wobble then I expect from the BCM QC and tolerances that were on the others. I sold it for a loss and bought a new one that is perfect. That is my experience and even with those issues I'd do it again.

  • 5
    Upper

    Fantastic and light weight. Very impressed with the product and can’t wait to send more rounds down range with it.

  • 5
    Bcm barrel

    One of the best barrels out there, looking forward for another one for my next build

  • 5
    Solid upper. Nothing bad to say here.

    Second one I bought recently. Have one light weight and one enhances light weight. Tight tolerances. Thought I swap the handguard but i guess that’s better than It coming off easily. Worth the money.