BCM® BFH 11.5" Carbine Upper Receiver Group w/ KMR-A10 Handguard

MSRP: $869.95
Your Price: $689.95
(You save $180.00 )
(46 reviews) Write a Review
SKU:
BCM-URG-11-BFH-KMR-A-10

Out of stock

All BCM® Upper Receiver Groups with a KMR-A Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM KeyMod Sling Mount
 
 
Bravo Company builds:  Life Saving Tools™
 
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
 
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
 
 
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
 
 
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
 
 
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 


Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
 
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
 
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

46 Reviews

  • 5
    Very nice!

    Posted by jethroUSMC on Jun 19th 2016

    Very well weight balanced, light, handy and the KMR-Alpha rail is very comfortable in bare or gloved hands.

  • 5
    BCM upper order

    Posted by Michael Tompko on May 13th 2016

    Very fast and efficient. Received product only a couple days from ordering

  • 5
    Amazing in every way

    Posted by brandon on Apr 26th 2016

    This is my third BCM kmr upper and I love each one more than the last! The 11.5 is perfect for my sbr build. If you're on the fence about getting the kmr rail on ANY length barrel just stop thinking and do it. I've used many other rails and the KMR is THE BEST rail anyone anywhere is making right now. Somehow it does great with heat too. Slow to heat up and quick to cool. The alpha actually feels very much the same as the original. Not a big weight difference at all. Maybe a little heavier than the magnesium kmr but for an 11.5" sbr or pistol that is going to be lighter out front anyway, maybe 2oz or 3oz will help balance the rifle out a little better. Typical BCM design. Extreme practicality at it's best.

  • 5
    BCM products, impressive as always

    Posted by Jacob Namynanik on Apr 26th 2016

    I just bought an 11.5 inch kmr alpha upper. Great fit and finish. Shoots great, with awesome balance while progressing through targets. Great job guys.

  • 5
    Not a surprise on the quality

    Posted by T.J.W. on Jan 21st 2016

    I own several BCM uppers but this is my 1st one with the KMR Aplha rail and I'm extremely happy. My initial intent was to remove the rail and replace it with my Knights Armament 10" URX rail but after handling this upper plans have changed. There is no better deal on complete uppers than BCM when you can get the BCG & Charging handle for a minimal up-charge and the swag is icing on the cake.

  • 5
    BCM Upper

    Posted by ET on Jan 21st 2016

    It came on time and in excellent condition. It is light, sturdy, and will suit my needs very well. BCM included some pretty awesome extras in the box as well.

  • 5
    BCM

    Posted by Tomas Moore on Dec 9th 2015

    I received this upper within 5 business days. It was exactly what i expected. The upper also came with some goodies from bcm. I will be ordering again asap!

  • 5
    LIGHT, LIGHT, LIGHT

    Posted by Rob G. on Dec 6th 2015

    Well there it is guys you can see how excited I am about a light hand guard. Let's face it I'm getting older and my back isn't what it use to be. This is a way I can shed some unecessay weight without going on a diet. In all seriousness though this is a great hand guard. Besides its lightness my other favorite thing is the additional mounting surfaces. (More than your usual 12, 3, 6 and 9 o'clock)

  • 5
    Great upper

    Posted by Daniel Kliewer on Nov 19th 2015

    Shipped fast ...can't wait to try it out..