BCM® Vertical Grip Mod 3-Picatinny - Flat Dark Earth

MSRP: $22.00
Your Price: $19.95
(You save $2.05 )
(54 reviews)
SKU:
BCM-VG-1913-MOD-3-FDE
Maximum Purchase:
100 units
BCM® Vertical Grip Mod 3-Picatinny - Flat Dark Earth
Stock Status:

 

BCM®™ VG-1913-Mod-3

 

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.

Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

 

Direct Attach Picatinny 1913 Rail Version

  • Low-profile length for increased mobility and decreased snag factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

 

Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx driver) into the screw from under the BCM 1913 Vertical Grip
  • Push tool into the screw to extend the Picatinny anchor, making it protrude from the top.
  • With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.
  • Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners

***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

54 Reviews

  • 5
    Customer review

    Review body is empty

  • 5
    Customer review

    Review body is empty

  • 5
    BCM Gunfighter Vert Grip

    Solid vert grip which is slightly angled allowing you to easily control the front of the rifle. Would buy again.

  • 5
    Great vertical grip

    Love this vertical grip. I mount it angled forward as it increases the pull into the shoulder and gives excellent stability while moving and shooting. Just the right length too as I use a pressure plate on top of my rail so this vg allows me to pull the weapon into my shoulder using three fingers and keeps my thumb free to activate the pressure plate.

  • 4
    Customer review

    A comfortable grip that stays out if the way.

  • 5
    VGM3

    Love the VGM3. it's short, compact, much like an oversized hand stop that you can still grip your hand around.

  • 5
    Perfect

    As always good to go

  • 5
    Phenomenal

    Best vertical grip I've ever used. Locking system is incredible and low profile and the slight angle is outstanding in reverse position to really lock into.

  • 5
    Great Little Handle

    I really like this new handle on my rifle. It gives me all the control I want without getting in the. way. The slight angle to it is a nice addition.