BCM® Vertical Grip Mod 3-KeyMod™ - Black

MSRP: $21.00
Your Price: $18.95
(You save $2.05 )
SKU:
BCM-VG-KM-MOD-3-BLK
Stock Status:

BCM®™ VG-KeyMod™-Mod-3

Direct Attach to KeyMod Version

  • Low-profile length for increased mobility and decreased 'snag' factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

 

Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod Vertical Grip
  • Push tool into the screw to extend the KeyMod anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod slots. Grip can be installed in your desired orientation, angled forward or back.
  • After the anchor is inserted, slide the BCM Vertical Grip forward until it travels no further.
  • Push the BCM Vertical Grip against rail, engaging the accessory's recoil lugs to the intersecting KeyMod opening.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners

***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

708 Reviews

  • 5
    BMG vertical hand grip

    Exactly what I needed to finish my build. Easy to install and fits to a tee.

  • 5
    Great grip

    I like this grip so much and it’s not 90 degrees I will be ordering another one in the future.

  • 5
    BCM vertical grip

    Perfect.. and I mean perfect grip for any AR platform, but especially for the AR pistol. Must buy!

  • 5
    I loved the item I ordered; but, I was going to apply it to my Palmetta Armory ll.5 inc barrel (556/223) but it not fit in the "slots" underneath. But it did fit into the "holes" or slots on the left angle. So it works and I like it that way so I h

    See Review subject.

  • 5
    Vertical grip- black

    Just put it on, very happy.

  • 5
    Front grip

    These are great and priced nice.

  • 5
    Vertical grip Mod 3

    I replaced a magpul angled foregrip with this BCM vertical. I like the BCM a lot better because you can mount it at a slight angle either forward or backward. I angled mine backward which allows for a good purchase to pull the gun into my shoulder. Also is an excellent reference point for finding my flashlight’s pressure pad. All around a perfect foregrip at a very reasonable prove. BCM stuff can’t be beat.

  • 5
    Exactly as expected

    Perfect, short enough to not get in the way but long enough for a great grip

  • 5
    Keymod vertical grip

    Affordable. Sturdy. Well designed vertical grip that you can flip slanted back or slanted towards end of barrel.
    Highly recommend for the price. And they send out loads of stickers so that’s a plus.