BCM® KeyMod™ 3 inch Picatinny Rail Section, Aluminum

MSRP: $23.00
Your Price: $19.95
(You save $3.05 )
(136 reviews)
SKU:
BCM-KMR-1913-A3
BCM® KeyMod™ 3 inch Picatinny Rail Section, Aluminum
Stock Status:

  • Rail section is made of Hard Anodized Aircraft Aluminum Alloy.
  • Mounting hardware is made of Corrosion Resistant Stainless Steel
  • Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
  • Available in three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
  • Features a Snag resistant design, while retaining Mil-Standards specs.
  • Self-contained assembly, eliminates the possible loss of mounting hardware.
  • Fits ALL KeyMod™ interface mounting surfaces.

    Installation Instructions:
    • Locate the forward position of the mount, indicated by the arrow marking on the bottom of the rail section, ensure the arrow points towards the muzzle
    • With a T15 Torx™ wrench, loosen (counter-clockwise) the mounting screws enough to allow the anchoring nuts to drop in and slide fully forward into the desired mounting position of your KeyMod rail system
    • Tighten screws (clockwise) until firmly secured (DO NOT exceed 18-20 in-lbs)
    • For more secured mounting, apply blue thread locking compound to screw threads only.
 
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

136 Reviews

  • 5
    My Experiance

    The parts I could not find locally...... you had and I will say great job will buy again.

  • 5
    Awesome as Ussual

    Quick shipping, and as always Great Quality......

  • 5
    Solid Mount

    I net shopped high and low and the piece just kept popping up so I caved and bought it. There's a reason it's the one that comes up a lot in searches....Quality. Quit looking at something plastic and cheaper and just buy it. If your argument is the weight of that metal vs plastic then go away, do some push-ups and then come back and buy the BC gear that I'm reviewing.

  • 5
    top quality

    Excellent product.

  • 5
    nice

    looks great, fit is perfact, solid peice, ad enough space to put light or laser, grips.

  • 5
    Keymod Picatinney Rail

    Install, fit, & finish were seamless. I ordered two of these to mount a quick release bipod to the rail when zeroing. Strongly recommend the aluminum over the polymer rail section, at least for mounting accessories that are load bearing, need to retain zero (lasers), or must be simply retained (serialized gear).

  • 5
    BCM® KeyMod™ Picatinny Aluminum Rail Section, 3 in

    Solid and well-made.

  • 5
    Gives you the option

    If your not happy with the limited options for the keymod system this gives you exactly what you need to make accessories designed for the picatinny rail work for you.

  • 5
    BMC picatinny aluminum rail

    Lightweight and easy to install