BCM® BFH 16" Mid Length Barrel, Stripped

MSRP: $425.00
Your Price: $324.00
(You save $101.00 )
SKU:
BCM-BRL-s-MID-16-BFH
Maximum Purchase:
5 units
Features:
Cold Hammer Forged Barrel
Stock Status:

Out of stock

(.750) at Gas Block location
Approximate Weight: 1lb 12oz.
 
Bravo Company MFG, Inc. Introduces a New Series of Barrels!
Specifications: Barrel, Forged, Hammer (BFH)
 
 
PLEASE NOTE: These batches will sell out quickly.
If the Stock Status is Out of Stock and you would like to get notification when more product arrives, please click the "Email me when Back-In-Stock" link under the Add To Cart button. You will get immediate notification of all new arrivals of product.
If you get an email notification and you check back again with our website to see that the product has already again sold out, please click the link again and add your email to the notification list.
 
Please check back with our website often. Sorry but we cannot take pre-orders or backorders on these products.
 
 
Life Saving Tools, by BCM®
 
 
These are stripped 16" Mid Length Cold Hammer Forged Barrels with gas ports installed and dimpled for a strong gas block installation.
 
 
 
 
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA! (Just like all the BCM products.)
 
M4 Feed Ramp Barrel Extension
In developing the USGI M4 carbine as one of the primary weapons for todays infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM barrels.
 
 
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military and private security personal for its superior ballistics.
 
Mil-Spec Barrel Steel (Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. The Mil-Spec grade steel gets its additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
 
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960s was the addition of the chrome lined bore and chamber. It is now a world wide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and on the USGI M16/M4 rifles will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
 
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
 
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military ammo.
 
 
Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
 
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
 
Copyright 2009 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

49 Reviews

  • 5
    Top quality barrel

    I have used these barrels on three different rifle builds and all shoot MOA or better. I recommend these barrels to anyone building a high end carbine.

  • 5
    JR Hendrix

    Product appears to exceed my expectations. Waiting on delivery of barrel nut and hand rail for installation but could be happier right now. Thanks Bravo Company.

  • 5
    BCM BFH 16" Mid Length Barrel, Stripped

    I haven't had the opportunity to test the barrel yet. But it installed with a nice tight fit. Delivery was faster than I expected. Very satisfied so far.

  • 5
    Spend the extra couple bucks

    This thing is beautiful and solid. I can't wait to shoot it!

  • 5
    Excellent product!

    Well made barrel. It is selling at a good price. Thank you!!

  • 5
    Excellent product

    I like it 2 thumbs up

  • 5
    Excellent product

    I was worried if the barrel has dimple for the gas block installation, yet since I received this barrel and saw all specs, and dimple for gas block, I am more than satisfy. The barrel was wrapped with bubble bag and oiled preventing corrosion, a plastic cap covered muzzle thread. Cold hammer Forged is excellent.

  • 5
    Wow

    Shoots great!

  • 5
    Really nice

    That's exactly what I was looking for. Great barrel for a nice price and reliable.