BCM® BFH 11.5" Carbine Upper Receiver Group w/ MCMR-10 Handguard

MSRP: $956.95
Your Price: $758.95
(You save $198.00 )
(65 reviews) Write a Review
5.56 NATO
Barrel Length:
Barrel Style:
Barrel Profile:
Stock Status:

All BCM® Upper Receiver Groups with a MCMR Handguard Include:

  • One 3" Picatinny Rail Section
  • One BCM MCMR Sling Mount
Bravo Company builds:  Life Saving Tools™
Manufactured by Bravo Company MFG, Inc. (BCM)
These Barreled Upper Receiver Groups are designed for shooting professionals and responsible civilians with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.
Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH series of barrels are made right here in the USA. (Just like all the BCM products.)
M4 Feed Ramp Barrel Extension and Upper Receiver
In developing the USGI M4 carbine as one of the primary weapons for today's infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM upper receivers and all BCM barrels.
T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.
USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military, private security personal, and personal defense for its' superior ballistics.
Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. This grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade steel gets its' additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.
Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960's was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.
Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.
5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military or high quality personal defense ammounition. 

Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.
HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.
Copyright 2010-2020 Bravo Company MFG, Inc.
***This product contains chemicals/materials known to the State of California to cause cancer and other reproductive harm. To learn more, visit www.p65warnings.ca.gov.***

65 Reviews

  • 5
    Amazing Upper, but…

    This upper is absolutely great. Build quality is superb, which is nothing new with BCM. The hand guard is a perfect mix of strength and toughness with weight saving qualities. The barrel is tough and very accurate. I do have two remarks however. 1) there is a section, where the upper receiver meets the hand guard, that the pic rail is much fatter and does not follow the typical spacing and width you see on your typical upper receiver. This just so happened to perfectly be where my scope mount needed to sit in order to get the perfect eye relief through my 1-6 scope. So I moved the mount back closer to my eye. It is still very manageable but not ideal. 2) this is partly my fault but something everyone should be aware of: make sure when you buy an upper that is 14.5 or less that your bolt carrier’s extractor spring has the rubber O-ring installed. I tried using my existing bolt carrier and it would suffer from a host of failure to ejects to double feeds. I could not find a solution to this problem online until I bought a BCM bolt carrier (which I needed anyway) which came with this O-ring and fixed my problems. Runs perfectly now.

    Side notes: upper works great with suppressor (OSS QD 5.56 Ti),
    Does not heat up terribly quick,
    Looks great

  • 5
    Preformed flawlessly

    Ran two mags through it once I got it all put together and it all ran perfectly didn’t have a single issue very happy with my purchase.

  • 5
    11.5 Barrel

    Great barrel !!! Def would recommend it for anyone

  • 5
    BCM 11.5” is AWESOME!!

    This was the first BCM I’ve bought. I’ve always liked the MK18’s and since I’ve heard Special Operations units we’re leaving the 10.3” and going to 11.5” suppressed I decided to get this upper. Let me just say I was so impressed with everything about it, I purchased a second one!
    Over the weekend I purchased a 14.5” SOCOM and it shipped out today! Can’t wait to get it also!
    BCM you do awesome quality work!

  • 5
    11.5 upper


  • 5

    This is my SHTF gun.. take it as it is!
    Add me on IG gap122129

  • 5
    11.5 BFH URG

    Amazing product awesome turn around time and excellent customer service

  • 5
    damn son where did you find this

    Shit runs like a raped ape, if you’re the type of guy who likes to sling guns while letting your mullet blow in the wind smoking only marb reds I’d buy this if I where you

  • 5
    Amazing quality

    Cant wait to finish my build and get to shoot this upper. It is extremely amazing quality as I can tell and very good attention to detail. Shipping was very fast! Would recommend bravo company to all of my friends!! If your thinking about this company and this upper just go for it you won’t regret it!